Lancia Fulvia Hf Coupé

LANCIA FULVIA HF COUPÉ


O Lancia Fulvia HF Coupé foi um dos carros do período forte da marca, já depois da recuperação do pós-Guerra.

Lançado em 1965, com base no Fulvia, um pequeno coupé surpreendeu por ser atraente e muito rápido.

Depois, com as séries HF, mais desportivas, o carro fez mesmo história, celebrizando-se nos ralis, pilotado, nomeadamente, por Sandro Munari.



O LANCIA FULVIA HF COUPÉ nasceu em 1966, tendo por base o Fulvia, que surgira dois anos antes, para substituir o Appia, e o Fulvia Coupé, apresentado no ano anterior.

O Fulvia surpreendeu, em 1963, com o seu pequeno motor de quatro cilindros em V e 1,1 litros de cilindrada.

Tinha uma carroçaria com design prático, muito quadrado e montava o propulsor num sub-chassis dianteiro, solução que já tinha sido utilizada com sucesso pelso técnicos da Lancia.

O Fulvia era um carro que interpretava bem as necessidades do mercado nos anos 60 e constituiu uma boa operação comercial para a marca.

Mas, a Lancia não ficou de braços cruzados e, dois anos depois do seu lançamento, apresentou uma versão coupé, com a mesma base mecânica, mas com 80 cavalos de potência.

O carro não só era rápido, como representava uma noa base para progredir, o que aconteceu um ano mais tarde, com a sérir HF, mais desportiva.

Esta série caracterizava-se por ter mais oito cavalos de potência e por ter sido alvo de uma "cura de emagrecimento", à custa da utilização do alumínio e de um interior mais espartano no que toca ao equipamento.

O Fulvia HF começou desde logo a ser utilizado por muitos pilotos amadores nos ralis italianos, onde se revelou muito competitivo.

De tal forma que o director desportivo da equipa, Cesare Fiorio, convenceu os dirigentes da Lancia a competir nos ralis internacionais, pelo que o pequeno motor de 1,3 litos foi ainda mais refinado, passando a debitar 101 cavalos de potência.

Foi o início de uma carreira internacional brilhante na competição, que manteve o Fulvia HF em produção até 1976.



CLUBE RESTRITO:

A designação HF, aplicada ao Fulvia coupé em 1966, correspondeu a uma política de cativar clientes totalmente virada para a competição.

O HF representava um carro menos confortável e equipado, mas com um desempenho muito superior - um automóvel destinado a um grupo restrito de utilizadores, leais à Lancia e ao espírito das corridas.

Daí a opção do logótipo HF - iniciais de High Fidelity, formando-se um clube dos clientes fieis à marca - depois utilizado nos seus sucessores nos ralis, o Stratos e o Delta.
 
OP
OP
Guilherme Coutinho

Guilherme Coutinho

Clássico
Imagens
 

Anexos

  • 72barbasio.jpg
    72barbasio.jpg
    38 KB · Vistos: 8
  • 72Elbabesozzi2.jpg
    72Elbabesozzi2.jpg
    66 KB · Vistos: 7
  • 72kallstrom1.jpg
    72kallstrom1.jpg
    119.7 KB · Vistos: 5
  • 2492_mc_6.jpg
    2492_mc_6.jpg
    36.9 KB · Vistos: 6
  • fan1-70p.jpg
    fan1-70p.jpg
    16.3 KB · Vistos: 6
  • mug70.jpg
    mug70.jpg
    33 KB · Vistos: 4
  • lanciaitaliasalto.jpg
    lanciaitaliasalto.jpg
    40.8 KB · Vistos: 3
  • lancia04fulviaHF70.jpg
    lancia04fulviaHF70.jpg
    51.3 KB · Vistos: 6
  • kallstromsvezia70.jpg
    kallstromsvezia70.jpg
    52 KB · Vistos: 4
  • tb_05_b_04.jpg
    tb_05_b_04.jpg
    63.2 KB · Vistos: 9

Marco Pestana

MarcoSprint MarcoVW61
"Rampa dos Barreiros " em 26 Novembro 2006- Clube de Automóveis Clássicos da Madeira - CACM

Lancia Fulvia HF 1600 muito bonito que participou pelas ruas da cidade do Funchal...

Mais fotos Do FULVIA HF e outros clássicos no site:


http://www.bmwmadeira.org/galeria/v/RampaBarreiros24NOV06

Abraço
 

Anexos

  • DSC00730.JPG
    DSC00730.JPG
    59.4 KB · Vistos: 10
  • DSC00729.JPG
    DSC00729.JPG
    58.7 KB · Vistos: 15
  • DSC00728.JPG
    DSC00728.JPG
    57.7 KB · Vistos: 15
  • DSC00726.JPG
    DSC00726.JPG
    61.2 KB · Vistos: 11
  • DSC00725.JPG
    DSC00725.JPG
    59.8 KB · Vistos: 18
  • DSC00751.JPG
    DSC00751.JPG
    59 KB · Vistos: 15
  • DSC00757.JPG
    DSC00757.JPG
    59.5 KB · Vistos: 13
  • DSC00758.JPG
    DSC00758.JPG
    60.4 KB · Vistos: 13
OP
OP
Guilherme Coutinho

Guilherme Coutinho

Clássico
;)
 

Anexos

  • salto1.jpg
    salto1.jpg
    42.8 KB · Vistos: 8
  • open-hf.jpg
    open-hf.jpg
    46.1 KB · Vistos: 7
  • lancia_fulvia_cuope.jpg
    lancia_fulvia_cuope.jpg
    38.3 KB · Vistos: 6
  • lancia02ad92.jpg
    lancia02ad92.jpg
    42.1 KB · Vistos: 6
  • Creat0002.jpg
    Creat0002.jpg
    90.1 KB · Vistos: 8

Eduardo Flôr

Clássico
Tambem deixo aqui algumas
 

Anexos

  • Lancia_Fulvia__detail_by_hingra.jpg
    Lancia_Fulvia__detail_by_hingra.jpg
    29.4 KB · Vistos: 8
  • Lancia_Fulvia_by_Heron152.jpg
    Lancia_Fulvia_by_Heron152.jpg
    75.8 KB · Vistos: 10
  • Lancia_Fulvia_HF_by_cheedragen.jpg
    Lancia_Fulvia_HF_by_cheedragen.jpg
    65.9 KB · Vistos: 13
  • lancia_fulvia_by_donfoto.jpg
    lancia_fulvia_by_donfoto.jpg
    72.6 KB · Vistos: 5
Que grande máquina!!! :huh:

Tenho tanta pena de não ter €€.... tenho um debaixo de olho, vamos ver se com jeitinho ainda vem morar para minha casa ;)
 
OP
OP
Guilherme Coutinho

Guilherme Coutinho

Clássico
Alguma informação sobre os Lancias Fulvias (no geral, não a série HF)

Está em inglês!!!


The Lancia Fulvia is an Italian car introduced at the Geneva Motor Show in 1963 by Lancia. It was produced by that company, and later by FIAT, through 1976. Fulvias are notable for their role in automobile racing history, including winning the International Rally Championship in 1972. On testing it in 1967, Road & Track summed up the Fulvia as "a precision motorcar, an engineering tour de force".

Chassis

The Fulvia was designed by Antonio Fessia to replace the Lancia Appia, with which it shared some components. The Appia was a rear wheel drive car, however, while the Fulvia moved to front wheel drive like the Flavia; the general engineering design of the Fulvia was identical to that of the Flavia with the major exception of the engine, the Flavia having a four cylinder horizontally opposed engine and the Fulvia a 'Narrow Angle' vee configuration as featured on Lancias from the Lambda. The Fulvia used a longitudinal engine mounted in front of its transaxle. An independent suspension in front used wishbones and a single leaf spring, while a solid axle with a panhard rod and more leaf springs was used in back. Four wheel Dunlop disc brakes were a welcome novelty, though Road & Track still noted some significant brake fade.

Engine

One element that was new was the narrow-angle V4 engine. Designed by Zaccone Mina, it used a narrow angle (12°53'28") and was mounted well forward at a 45° angle. The engine is a DOHC design with a one camshaft operating all intake valves and another operating all exhaust valves. It is unique in that though a vee configuration, the very narrow angle of the cylinders allowed for use of a single cylinder head.

Displacement began at just 1091 cc with 59 hp (44 kW) with a 72 mm bore and 67 mm stroke. A higher (9.0:1) compression ratio raised power to 71 hp (53 kW) soon after.

The engine was bored to 6 mm to enlarge displacement to 1216 cc for the HF model. This, and some tuning, raised output to 80 to 88 hp (60 to 66 kW).

The engine was reengineered with a slightly narrower bank angle (12°45'28") and longer (69.7 mm) stroke for 1967. Three displacements were produced: 1199 cc (74 mm bore), 1231 cc (75 mm bore), and 1298 cc (77 mm bore). The latter engine is most common, with the former only sold in Greece. The American-spec 1.3 L produced 87 hp (65 kW) and was described as "highly tuned" by Road & Track at the time.

The engine was redone again for a new HF with an even-narrower angle (11°20' now) and longer 75 mm stroke for its final incarnation. A bore of 82 mm gave it a displacement of 1584 cc, and power shot up to 114 to 132 hp (85 to 98 kW) depending on tune.

Body styles

The Fulvia was available with a number of bodies:

Berlina - A compact four-door introduced in 1963.
Berlina 2C - An updated Berlina for 1963 with 71 HP engine.
Berlina GT - An updated Berlina for 1967 with the 1216 cc or 1231 cc engine.
Berlina GTE - Another Berlina update for 1968 with the 1298 cc engine.
Berlina '69 - Another Berlina update for 1969 with the 1298 cc engine and different body.
Berlina '5m - Last Berlina update for 1970 with the 1298 cc engine and 5 speed gearbox.
Coupe - A compact two-door introduced in 1965, the coupe uses a 150 mm shorter wheelbase along with the larger (1216 cc) or 1231 cc engine.
Coupe HF - A rally car version of the coupe introduced later in 1965
Rallye 1.3 HF - An updated HF with the new 1298 cc engine with 101 HP.
Rallye 1.3 - An updated coupe with the new 1298 cc engine with 87 HP.
Rallye 1.3s - An updated Rallye 1,3 with the 1298 cc engine producing 93,2 HP.
Rallye 1.6 HF - The evoution of Rallye 1,3 HF with a 1584 cc engine producing 115 HP.
Rallye 1.6 HF Variante 1016 - The most-powerful Fulvia with a 1584 cc engine producing 132 HP.
Coupe 1,3s - Face-lifted body and new 5 speed gearbox with 1298 cc producing 90 HP.
Coupe 1600 HF - Face-lifted body with 1584 cc engine producing 114 HP.
Coupe 1,3s Montecarlo - Replica of 1972 Montecarlo Rally works car livery with 1298 cc producing 90 HP.
Sport - a 2-seat Zagato rebody of Coupe with aluminium panels and 1216 cc engine.
Sport 1,3 - An updated Sport with 1298 cc producing 87 HP, first 700 cars still have aluminium body.
Sport 1,3s - An updated Sport 1,3 with 1298 cc producing 93,2 HP.
Sport 1,3s 2nd series - An updated Sport 1,3 with 5 speed gearbox.
Sport 1600 - An updated Sport with 1584 cc engine producing 114 HP.
The Fulvia saloon was updated for 1969 with a 20 mm longer wheelbase, new styling, and an updated interior. The Fulvia Coupe and Sport were updated in mechanics and styling in 1970
 

João Pereira Bento

128coupe
Premium
Portalista
Rallye 1.6 HF Variante 1016 - The most-powerful Fulvia with a 1584 cc engine producing 132 HP.

Este carro consegue-se distinguir por ter os farois de dentro maiores.;)
 
Topo